Typical Physical Properties

• Product: 18103

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyether
  • Uses: textile lamination, medical devices
  • Extrusion method: blown film
  • Gauge: 1.0-10 mils (25-250 microns)
  • Width: up to 86 inches (2.18 meters)
  • Length: up to 1000 non-spliced yards
  • Smooth surface
  • Soft ether
  • Mid-range softening temperature
  • USP Class VI certified polymer
  • FDA CFR 175.105

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	84 A
  Tensile stress @ 100% elongation	D-412	psi MPa	900 6.2
  Tensile stress @ 300% elongation	D-412	psi MPa	1450 9.6
  Tensile strength	D-412	psi MPa	5500 37.9
  Elongation @ break	D-412	%	540
  Tensile set @ break	D-412	%	40
  Tear strength	D-6241	pli kN/m	460 80.6
  Abrasion resistance	D-10442	mg loss	20

• Product: 18212

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyether
  • Uses: textile lamination, die cut & seal
  • Extrusion method: flat die
  • Gauge: 10-20 mils (250-500 microns)
  • Width: up to 60 inches (1.52 meters)
  • Length: up to 1000 non-spliced yards
  • Smooth & matte surfaces
  • Soft ether
  • Mid-range softening temperature
  • USP-certified polymer
  • FDA CFR 175.105
  • NSF potable water

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	87 A
  Tensile stress @ 100% elongation	D-412	psi MPa	1000 6.9
  Tensile stress @ 300% elongation	D-412	psi MPa	1700 11.7
  Tensile strength	D-412	psi MPa	6200 42.7
  Tensile set @ 200% E	D-412	%	21
  Elongation @ break	D-412	%	580
  Tear strength	D-6241	pli kN/m	435 76.2
  Abrasion resistance	D-10444	mg loss	5.0

• Product: 18214

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyether
  • Uses: textile lamination, bladders
  • Extrusion method: blown film
  • Gauge: 1.0-10 mils (25-250 microns)
  • Width: up to 68 inches (2.18 meters)
  • Length: up to 1000 non-spliced yards
  • Smooth surface
  • Soft ether
  • Mid-range softening temperature
  • USP-certified polymer
  • FDA CFR 177.1680
  • FDA CFR 177.2600

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	85 A
  Tensile stress @ 100% elongation	D-412	psi MPa	690 4.76
  Tensile stress @ 300% elongation	D-412	psi MPa	1000 6.9
  Tensile strength	D-412	psi MPa	4000 27.59
  Elongation @ break	D-412	%	700
  Tensile set @ 200% E	D-412	%	15
  Tear strength	D-6241	pli kN/m	370 64.78

• Product: 18233

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyether
  • Uses: textile lamination, high MVT
  • Extrusion method: blown film
  • Gauge: 1.0-10 mils (25-250 microns)
  • Width: up to 68 inches (2.18 meters)
  • Length: up to 1000 non-spliced yards
  • Smooth surface
  • Harder ether
  • Mid-range softening temperature

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	90 A
  Tensile strength	D-412	psi MPa	7000 48.26
  Tear strength	D-6241	pli kN/m	480 84
  Elongation @ break	D-412	%	500
  Tensile stress @ 100% elongation	D-412	psi MPa	900 6.21
  Tensile stress @ 300% elongation	D-412	psi MPa	2300 15.86
  MVT, 1.0 mil at RT, 50% RH	E-96131	g/m2/da	725

• Product: 18433

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyether
  • Uses: textile lamination, flame resistance
  • Extrusion method: blown film
  • Gauge: 1.0-10 mils (25-250 microns)
  • Width: up to 86 inches (2.18 meters)
  • Length: up to 1000 non-spliced yards
  • Smooth surface
  • Soft ether
  • Mid-range softening temperature
  • UL-94 V2
  • FAR 25.853 (A)

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	86 A
  Tensile strength	D-412	psi MPa	4800 33
  Tear strength	D-6241	pli kN/m	600 105
  Abrasion resistance	D-10443	mg loss	30
  Elongation @ break	D-412	%	640
  Tensile stress @ 100% elongation	D-412	psi MPa	1100 7.6
  Tensile stress @ 300% elongation	D-412	psi MPa	1750 12
  Tensile set @ break	D-412	%	70

• Product: 19205

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyether
  • Uses: textile lamination
  • Extrusion method: blown film
  • Gauge: 1.0-10 mils (25-250 microns)
  • Width: up to 86 inches (2.18 meters)
  • Length: up to 1000 non-spliced yards
  • Smooth surface
  • Hard ether
  • High softening temperature

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	92 A
  Tensile strength	D-412	psi MPa	5150 35.5
  Tear strength	D-6241	pli kN/m	540 94.6
  Abrasion resistance	D-10442	mg loss	50
  Elongation @ break	D-412	%	521
  Tensile stress @ 100% elongation	D-412	psi MPa	1430 9.9
  Tensile stress @ 300% elongation	D-412	psi MPa	2700 18.6

• Product: 19426

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyether
  • Uses: textile lamination
  • Extrusion method: blown film
  • Gauge: 1.0-10 mils (25-250 microns)
  • Width: up to 76 inches (1.93 meters)
  • Length: up to 1000 non-spliced yards
  • Smooth surface
  • Hardest ether
  • Highest softening temperature
  • No inorganic wax

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	95 A
  Tensile strength	D-412	psi MPa	5200 36
  Tear strength	D-6241	pli kN/m	800 140
  Abrasion resistance	D-10443	mg loss	55
  Elongation @ break	D-412	%	490
  Typical melt temperature	N/A	°C °F	198-388 390-406
  Tensile stress @ 100% elongation	D-412	psi MPa	1750 12
  Tensile stress @ 300% elongation	D-412	psi MPa	3000 21
  Tensile set @ break	D-412	%	65

• Product: 27303

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyester
  • Uses: textile lamination
  • Extrusion method: blown film
  • Gauge: 1.0-10 mils (25-250 microns)
  • Width: up to 86 inches (2.18 meters)
  • Length: up to 1000 non-spliced yards
  • Smooth surface
  • Softest ester
  • Low softening temperature

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	78A
  Tensile stress @ 100% elongation	D-412	psi MPa	600 4.1
  Tensile stress @ 300% elongation	D-412	psi MPa	1100 7.5
  Tensile strength	D-412	psi MPa	5300 36.5
  Elongation @ break	D-412	%	700
  Tensile set @ 200% E	D-412	%	60
  Tear strength	D-6241	pli kN/m	450 78

• Product: 27370

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyester
  • Uses: elastics
  • Extrusion method: cast film
  • Gauge: 1.0-5 mils (25-125 microns)
  • Width: up to 60 inches (1.52 meters)
  • Length: up to 1000 non-spliced yards
  • Smooth & matte surfaces
  • Soft ester
  • Mid-range softening temperature
  • Low softening temperature

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	78 A
  Tensile strength	D-412	psi MPa	8000 55.16
  Tear strength	D-6241	pli kN/m	430 75.25
  Elongation @ break	D-412	%	500
  Tensile stress @ 100% elongation	D-412	psi MPa	500 3.45
  Tensile stress @ 300% elongation	D-412	psi MPa	1500 10.34
  Tensile set at 200% E	D-412	%	5

• Product: 29213

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyester
  • Uses: textile lamination, die cut & seal, medical devices
  • Extrusion method: blown film
  • Gauge: 1.0-10 mils (25-250 microns)
  • Width: up to 76 inches (1.93 meters)
  • Length: up to 1000 non-spliced yards
  • Smooth finish
  • Hard ester
  • High softening temperature
  • USP Class VI
  • FDA CFR 175.105
  • FDA CFR 177.1680
  • FDA CFR 177.2600

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	90 A
  Tensile strength	D - 412	psi MPa	8000 55.2
  Tear strength	D-6241	pli kN/m	600 105.1
  Abrasion resistance	D-10445	mg loss	2.6
  Elongation @ break	D-412	%	450
  Tensile stress @ 100% elongation	D-412	psi MPa	1600 11
  Tensile stress @ 300% elongation	D-412	psi MPa	3500 24.1

• Product: SS-4031

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyester
  • Uses: lamination
  • Extrusion method: blown film
  • Gauge: 3 - 6 mils (75 - 150 microns)
  • Width: up to 86 inches (2.18 meters)
  • Length: up to 1000 non-spliced yards
  • Excellent melt flow during lamination

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	85 A
  Specific gravity		D-792	1.20
  Tear strength	D-6241	pli kN/m	500 87.50
  Elongation @ break	D-638	%	475
  Melt point range		°F °C	293 to 320 145 to 160
  Tensile strength @ 100% elongation	D-638	psi MPa	1000 6.90
  Tensile strength @ 300% elongation	D-638	psi MPa	2500 17.24
  Tensile strength @ break	D-638	psi MPa	8000 55.16

• Product: St-3566

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyether
  • Uses: textile lamination
  • Extrusion method: blown film
  • Gauge: 5-15 mils (125-375 microns)
  • Width: up to 80 inches (2.03 meters)
  • Length: up to 1000 non-spliced yards
  • Good melt, flow properties
  • Moderate slip

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	80A
  Specific gravity	D-792		1.11
  Tear strength	D-6241	pli kN/m	425 74.38
  Elongation @ break	D-638	%	500
  Max service temperature		°F °C	-65 - 175 -54 - 79
  Melt point range		°F °C	302 - 356 150 - 180
  Tensile strength @ 100% elongation	D-638	psi MPa	800 5.52
  Tensile strength @ 300% elongation	D-638	psi MPa	1650 11.38
  Tensile strength @ break	D-638	psi MPa	7500 51.71

• Product: ST-3995

  Film Type Description

  • Thermoplastic polyurethane
  • Aromatic polyether
  • Uses: hot melt adhesive, textile lamination
  • Extrusion method: blown film
  • Gauge: 1.5-6 mils (37.5-150 microns)
  • Width: up to 80 inches (2.03 meters)
  • Length: up to 1000 non-spliced yards
  • Low melt, high tack for excellent melt adhesion
  • Enhanced UV stability
  • Low slip for maximum adhesion to many substrates
  • Good elasticity for use where soft, rubber-like, low-additive TPU is desired

  Physical Property	Test Method	Units	Test Value
  Hardness	D-2240	Shore	80A
  Specific gravity	D-792		1.13
  Tear strength	D-6241	pli kN/m	400 70.00
  Elongation @ break	D-638	%	450
  Max service temp		°F °C	-65 - 175 -54 - 79
  Melt point range		°F °C	302 - 329 150 - 165
  Tensile strength@ 100% elongation	D-638	psi MPa	1200 8.27
  Tensile strength @ 300% elongation	D-638	psi MPa	2000 13.79
  Tensile strength @ break	D-638	psi MPa	4500 31.03
  Tensile set @ break	D-638	%	20
  Melt point index (190°C/8700g) (374°F/307oz)		°F °C	49 g/10 min 1.7 oz/10 min